Ritz Spinning Mills Limited
 
 
     
 
Spinning Equipments
 

CHOUTUPPAL

Mixing
LMW Bale plucker
Blowroom
LMW
Carding
LC300V3/LC333
Drawframe
D0/6,LD2
RSB
LMW/Reiter
Simplex
LFS1440
Ring Frame
LR6/S
Autoconer
Muratec 21C
TFO
Veejay Lakshmi/Volkmann focus
Humidification Batliboi
 
 

Mixing

 
  • In Mixing department the bales of fibres are made to small tufts and fibres will be layered in blended proportion.

Blow Room [ MBO LB-3/2, MO LB -3/5 , Flexiclean LB 5/6]

Blow Room
  • Openning fibres by removing the foreign matter as the waste. The foreign matter consists mainly of fused fibres/chips
  • To mix thoroughly the different fibres of mixing (eg. Polyester & Viscose) so as to give a homogeneous blending.
  • To transfer the fibre to carding department by LA-5/6 Fan & chute feed system.

Carding [LC-300A V-3 / LC-333 with AutoLeveller & Fine feed. LA-7/5 & LA 7/6]

Carding
  • Individualize the fibres through carding action.
  • Open the fibres by removing fused fibres/chips as waste.
  • Remove the neps and short fibres present in the fibres as a Flat waste.
  • To prepare sliver in coiled form with uniformity and required Hanks measured by Auto Leveller.

Draw Frame [LDO/6,/LRSB-851 Digital], Reiter

Draw Frame
  • Doubling & Drafting of sliver.
  • Parallelization, Strengthening & Individualization of sliver.
  • In built digital auto leveller in LRSB Draw frame to produce even & uniform sliver.as per required Hank.

Simplex

Simplex
 
  • The draw frame Sliver is fed into this frame and it passes between four pair of rollers and the sliver is condensed. The condensed drafted sliver now called as rove is twisted and wound in to packages. The package is built layer by layer with a system by use of a variation of the lift timed to give a shape of package that will hold the soft low twisted rove, required to unwind at the spinning department.

Ring Frame [LR-6 S]

Ring Frame
  • Twist the drafted fibre to generate count. Wind the yarn onto bobbins in a suitable package for further process.

Autoconer

Autoconer
  • To wind spinning yarn on to final cone after detecting & removing defects from yarn by yarn clearer leopfe if any in spinning yarn with a suitable cone package.(spliced yarn).

TFO

Packing
  • The method of twisting two or more single yarns is called doubling or folding or ply twisting. Such yarns are designated as doubled yarn, folded yarn or plied yarn and the machines intended for the purpose are called doublers, ply-twisters or two-for-one (TFO) twisters.

Packing

Packing
  • Pack the finished yarn in cartons/pallets as per the customer requirements.
 
Home | About Us | Quality | Products | Infrastructure | Contact Us
© 2017, Ritz Spinning Mills Limited, All Rights Reserved.